
|

Installation
Instructions
Anyone
can easily install Almost Airtight in just minutes!!
To install our product, you'll need:
- Hacksaw
- Drill with a #2
Phillips driver tip
- Diagonal Cutters
- Marking Pen or
Pencil
- Measuring Tape
- Mounting Hardware (included
with purchase)
Professional installation
is available for commercial applications. For more
information, contact us.
- Click on a thumbnail
picture for a larger view -
Step
1. |
Brush
is installed, with door closed, on the hinge side of the door.
Next, measure the door from edge to edge. |

 |
Step 2. |
Mark the bottom sweep to the same measurement you have for the
door.
Here's where the channel needs to be cut...But first, see Step #3. |

 |
Step
3. |
Before
cutting the channel, slide the brush out of the way. |
 |
Step
4. |
Cut
the channel at your mark. |
 |
Step
5. |
Crimp
one end of the channel. |
 |
Step
6. |
Slide
the brush back into the channel. Trim off excess brush, then crimp
that end of rail (as done in step #5). |
 |
Step
7. |
Line
up edge of brush with edge of door. Before attaching, make sure
you have some flex or bend of bristles at the threshold or sill.
Make adjustments if necessary. |
 |
Step
8. |
Attach
brush to door with mounting hardware (included), and a #2 Phillips
driver bit. |
 |
|
|
Complete installation instructions and mounting hardware are also included with
every order. For additional installation information or for general
installation questions, email us at sales@almostairtight.com.
|

6746 Dandison Blvd. Orchard Lake, Ml 48324
Phone: 800-482-4587 • Fax: 248-360-4912
Email: sales@almostairtight.com
Home |
About | Residential |
Commercial | How
To Install | Order Online |
Testimonials | Contact Us
|
 
Click
Here
To Order Online!



|